Safety Instructions For Installation - Miele SmartLine Operating And Installation Instructions

Install the wall units and rangehood before installing the SmartLine appliance to
avoid damaging it.

The veneer or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any splashbacks must be of heat-resistant
material as well.

The SmartLine appliance must not be installed over a fridge,
fridge-freezer, freezer, dishwasher, washing machine, washer-dryer
or tumble dryer.

This SmartLine appliance must not be installed above ovens
unless these have a built-in cooling fan.

After installation, the mains connection cable of the SmartLine
appliance must not come into contact with any moving kitchen
component (e.g. a drawer) or be subject to mechanical loads which
could damage it.

Carefully observe the safety clearances listed on the following
pages.

Safety instructions for installation

49