Initial Settings; Initial Setup; Setting The Security Function - Kenwood DDX4017DAB Instruction Manual

INITIAL SETTINGS

INITIAL SETTINGS

Initial setup

When you power on the unit for the first time or
reset the unit, the initial setting screen appears.
• You can also change the settings on the <Setup>
screen. (Page 55)
1
Perform the initial settings.
<Demonstration> Activate or deactivate the
(Page 57) display demonstration.
<Language> Select the text language
(Page 58) used for on-screen
information.
• Set <GUI Language>
to display the operation
buttons and menu items
in the selected language
([Local]) or English
([English]).
4
<Rear Camera> Configure the settings to
(Page 34) display the picture from
the connected rear view
camera.
<User Change the display design.
Customize>
(Page 51)
<Viewing Angle> Select the viewing angle
(Page 57) in relation to the monitor
panel to make the panel
easier to see.
2
Finish the procedure.
The Home screen is displayed.

Setting the security function

❏ Registering a security code
You can set a security code to protect your receiver
system against theft.
1
Display the Home screen.
On the monitor panel:
2
Display the <System> setting screen.
3
Display the <Security Code Set> screen.
• You can change the page to display more
items by pressing [ ]/[
4
Enter a four-digit number (1), then
confirm the entry (2).
• Press [Clear] to delete the last entry.
• Press [Cancel] to cancel the setting.
• Press [ ] to return to the current source
control screen.
5 4
Repeat step to confirm your security
code.
Now, your security code is registered.
].