Ipod/Iphone - Kenwood DDX4017DAB Instruction Manual

iPod/iPhone

iPod/iPhone
Preparation
❏ Connecting iPod/iPhone
• For details about connecting iPod/iPhone, see
page 65.
• For playable iPod/iPhone types, see page 70.
Connect your iPod/iPhone according to your
purpose or the type of iPod/iPhone.
Wired connection
• To listen to music: Use USB Audio cable for iPod/
iPhone.
– For Lightning connector models: KCA-iP103
(optional accessory)
– For 30-pin connector models: KCA-iP102
(optional accessory)
• To watch video and listen to music (only for
30-pin connector models): Use USB Audio and
Video cable for iPod/iPhone—KCA-iP202 (optional
accessory).
– For Lightning connector models: You cannot
watch video with KCA-iP202.
Bluetooth connection
Pair the iPod/iPhone through Bluetooth. (Page 38)
• You cannot watch video with a Bluetooth
connection.
❏ Selecting iPod/iPhone device to play
and the connection method
1
Display the <System> setting screen.
On the Home screen:
2
3
Select the connection method (1), then
confirm the selection ([OK] or [Next]) (2).
[USB 1 Wire] Select this when the iPod/
iPhone is connected using
KCA-iP102 or KCA-iP103
(optional accessory).
[USB + AV-IN] Select this when the iPod/
iPhone is connected using
KCA-iP202 (optional accessory).
[Bluetooth] Select this when the iPod/
iPhone is connected via
Bluetooth. (Go to step 4.)
4
When selecting [Bluetooth] as the
connection method: Select the device (1),
then press [OK] to connect (2).
• If the device is already connected, skip step 1.
ENGLISH 21