Kenwood DDX4017DAB Instruction Manual page 45

BLUETOOTH BLUETOOTH
❏ Selecting an audio file from the menu
1
2
Select a category (1), then a desired item
(2).
• Select an item in each layer until you reach
and select the desired file.
• You can change the page to display more
items by pressing [ ]/[
• Press [ ] to return to the upper layer.
Settings for Bluetooth devices
You can change various settings for using Bluetooth
devices on the <Bluetooth Setup> screen.
1
Display the <Bluetooth Setup> screen.
On the Home screen:
• You can also display the <Bluetooth Setup>
screen by pressing [
screen (Page 42) or [
source control screen (Page 44).
2
Configure the Bluetooth settings.
].
• You can change the page to display more
items by pressing [
❏ Setting items
<Paired
Device List>
<PIN Code>
<Device
Name>
] on the phone control
] on the "BT Audio"
]/[ ].
Press [Enter] to show the list of
registered devices. You can connect
a device or delete registered devices.
(Page 40)
Changes the PIN code of the unit.
(Page 39)
Shows the device name to be shown
on the Bluetooth device — DDX****.
<Device Shows the device address of the unit.
Address>
<Auto • ON (Initial): A connection is
Connect> automatically established with the
last connected Bluetooth device
when the unit is turned on.
• OFF: Cancels.
<Bluetooth Selects the speakers used for
HF/Audio> Bluetooth (both phone and audio
player).
• Front Only: Front speakers only.
• All (Initial): All speakers.
<Auto • ON: The unit answers the incoming
Response> calls automatically after 5 seconds.
• OFF (Initial): The unit does not
answer the calls automatically.
Answer the calls manually.
< Auto • ON (Initial): Establishes pairing
Pairing> automatically with the connected
iOS device (such as iPhone)
even if the Bluetooth function is
deactivated on the device. (Auto
pairing may not work for some
devices depending on the iOS
version.)
• OFF: Cancels.
<Initialize> Hold [Enter] to reset all settings
you have made for using Bluetooth
mobile phones and Bluetooth audio
players.
ENGLISH 45