Kenwood DDX7017BT Instruction Manual

Kenwood DDX7017BT Instruction Manual

Monitor with dvd receiver

Advertisement

DDX7017BT
DDX7017BTM
DDX717WBT
DDX717WBTM
MONITOR WITH DVD RECEIVER
INSTRUCTION MANUAL
© 2016 JVC KENWOOD Corporation
DDX4017BT
DDX417BT
DDX417BTM
This instruction manual is used to describe models listed below. Model
availability and features (functions) may differ depending on the country
and sales area.
• Region 2 (DVD Region Code 2 area)
• Region 3 (DVD Region Code 3 area)
• Region 4 (DVD Region Code 4 area)
B5A-1597-10c (MN/M2N/XN/A9N)

Advertisement

Table of Contents
loading

Summary of Contents for Kenwood DDX7017BT

  • Page 1 (functions) may differ depending on the country and sales area. • Region 2 (DVD Region Code 2 area) • Region 3 (DVD Region Code 3 area) • Region 4 (DVD Region Code 4 area) © 2016 JVC KENWOOD Corporation B5A-1597-10c (MN/M2N/XN/A9N)
  • Page 2: Table Of Contents

    The marking of products using lasers How to read this manual: • Illustrations of DDX7017BT Region 3 are mainly used for explanation. The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels.
  • Page 3: How To Reset Your Unit

    For safety... Manufacturer: kutusu) ürünler ev atıkları olarak atılamaz. • Do not raise the volume level too much, as this JVC KENWOOD Corporation Eski elektrik ve elektronik ekipmanlar, will make driving dangerous by blocking outside 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, bu ürünleri ve ürün atıklarını...
  • Page 4: Initial Settings

    Activate or deactivate the Display the <System> setting screen. The Home screen is displayed. (Page 60) display demonstration. <Language> Select the text language * Only for DDX7017BT/DDX7017BTM/DDX717WBT/DDX717WBTM. (Page 61) used for on-screen information. • Set <GUI Language> to display the operation buttons and menu items...
  • Page 5 INITIAL SETTINGS INITIAL SETTINGS • To clear the registered security code, perform  Display the <Security Code Set> screen. steps 1 and 2. • You can change the page to display more On step 3, press [CLR] to display <Security Code> items by pressing [ screen.
  • Page 6: Clock Settings

    INITIAL SETTINGS INITIAL SETTINGS Set the clock time. Finish the procedure. Clock settings Display the Home screen. On the monitor panel: DDX7017BT/ DDX7017BTM DDX717WBT/ DDX717WBTM <NAV>* Synchronizes the clock time with the connected navigation unit. DDX4017BT/ <Radio Data Synchronizes the clock time with DDX417BT/ * Appears only when a navigation unit is connected.
  • Page 7: Basics

    5 Volume K/J buttons • Displays the picture from the connected camera. (Hold) (Page 36) Adjusts the audio volume. (Page 9) DDX7017BT/DDX7017BTM 6 HOME button /VOICE button • Displays the “Mirroring” source control • Displays the Home screen. (Press) (Page 11) screen.
  • Page 8 BASICS BASICS 5 CAM/DISP OFF button 1 Reset button/Power indicator/Security indicator DDX4017BT • Displays the picture from the connected • Resets the unit. (Page 3) camera. (Press) (Page 36) • Lights up while the unit is turned on. • Turns off the screen. (Hold) (Page 10) •...
  • Page 9: Common Operations

    OFF] for <Manual Power OFF> beforehand. Turn to the right to increase, and turn to the left to (Page 61) decrease. DDX4017BT/ DDX7017BT/ DDX417BT/ DDX7017BTM To attenuate the sound (only for DDX7017BT/ DDX417BTM DDX7017BTM/DDX4017BT/DDX417BT/ (Hold) DDX417BTM) DDX717WBT/ DDX7017BT/ DDX717WBTM ❏ Turning off the power...
  • Page 10: Common Screen Operations

    BASICS BASICS ❏ Adjusting the panel angle (only ❏ Putting the unit in standby On the monitor panel (only for DDX7017BT/ DDX7017BTM/DDX4017BT): for DDX7017BT/DDX7017BTM/ Display all playback sources and items. DDX7017BT/ DDX717WBT/DDX717WBTM) On the Home screen: DDX7017BTM Display the <Angle Adjust> screen.
  • Page 11 BASICS BASICS 1 Displays the video control menu while playing a Common operating buttons: <Setup> screen 1 Displays/hides short-cut source selection Changes the detailed settings. (Page 58) video.* buttons. (Page 13) 2 Displays the other operation button window.* * Does not appear when there are no other operation buttons other than those currently shown on the source control screen.
  • Page 12: Selecting The Playback Source

    Selectable only when connection method other than [USB + (Page 10) AV-IN] is selected for <iPod Setup>. (Page 23) [APPs] Switches to the App screen from Only for DDX7017BT Region 4/DDX717WBT Region 4/DDX4017BT. the connected iPod touch/iPhone/ Only for DDX7017BT/DDX7017BTM/DDX717WBT/DDX717WBTM. Android device. (Page 26) [Spotify] Switches to the Spotify ❏...
  • Page 13: Using Short-Cut Buttons

    While displaying the source control screen, you can Home screen indicated below. jump to another screen from the pop-up short-cut menu. Display the pop-up short-cut menu. [TEL] Displays the phone control DDX7017BT/ screen. (Page 45) DDX7017BTM [Screen Displays the picture adjustment Adjustment] screen. (Page 53) DDX717WBT/ [Display OFF] Turns off the screen.
  • Page 14: Discs

    • The information displayed on the screen differs again into the loading slot to protect it from dust. depending on the type of disc/file being played back. Closing the monitor panel (only for DDX7017BT/ 1 Media type DDX417BT/ DDX7017BTM/DDX717WBT/DDX717WBTM) 2 Playback status...
  • Page 15 DISCS DISCS Operation buttons For audio playback Operation buttons • Available buttons on the screen and operations • Available buttons on the screen and operations differ depending on the type of disc/file being differ depending on the type of disc/file being played back.
  • Page 16 DISCS DISCS ❏ Selecting a folder/track on the list ❏ Video menu operations Displays the disc menu (DVD). MENU] You can display the video control menu during [T MENU] Displays the disc menu (DVD). video playback. [Highlight] Switches to the direct disc menu •...
  • Page 17 DISCS DISCS For VCD To select a track directly on a VCD To select Random playback mode • When playing a VCD with PBC activated, stop playback to deactivate the PBC function, then use the direct selection buttons to select a track number.
  • Page 18 DISCS DISCS ❏ Setting items <Down Mix> When playing back a multi-channel Settings for disc playback—<DISC disc, this setting affects the signals <Menu Select the initial disc menu language. Mode> reproduced through the front and/or Language> (Initial: English ) (Page 76) rear speakers.
  • Page 19: Usb

    Operation buttons Connecting a USB device Playback operations • Available buttons on the screen and operations You can connect a USB mass storage class device differ depending on the type of file being played When the operation buttons are such as a USB memory, Digital Audio Player etc. to back.
  • Page 20 ❏ Settings for USB playback—<USB ❏ Selecting a folder/track on the list <Screen Select the monitor type to watch a Mode> Ratio> wide screen picture on the external Display the folder/track list during monitor. playback. 16:9 (Initial) 4:3 LB 4:3 PS Select the folder (1), then the item in the <Drive Switches between internal memory...
  • Page 21: Android

    • This unit supports the Android™ application Selects repeat playback mode. KENWOOD Music Play. 1: Repeats the current track. • • When you use KENWOOD Music Play, you can • All: Repeats all tracks. search for audio files by Genre, Artist, Album, •...
  • Page 22: Ipod/Iphone

    <Android • BROWSE MODE: Controls from the – For 30-pin connector models: Use USB Audio Setup> unit (using the KENWOOD Music and Video cable for iPod/iPhone—KCA-iP202 Play application). (optional accessory). • HAND MODE: Controls other media player applications from the Android device (without using the KENWOOD Music Play application).
  • Page 23 • If the device is already connected, skip step 1. KCA-iP102 or KCA-iP103 (optional accessory). * Appears only for DDX7017BT/DDX7017BTM/DDX717WBT/ [USB + AV-IN] Select this when the iPod/ DDX717WBTM. iPhone is connected using KCA-iP202 (optional accessory).
  • Page 24 iPod/iPhone iPod/iPhone ❏ Displaying/hiding artwork of iPod/ Operation buttons Playback operations Displays the other operation button iPhone window. When the operation buttons are • To hide the window, press [ not displayed on the screen, touch Displays the <Equalizer> screen. the area shown on the illustration.
  • Page 25: Apps

    – You cannot watch video when connecting a A-Z], then select the first character on the Lightning connector model. keypad. • Only for DDX7017BT/DDX7017BTM/ • Available categories differ depending on the type – Alphabet search is not available when the DDX717WBT/DDX717WBTM : When you of your iPod/iPhone.
  • Page 26 • For Android devices, you can use more functions • You can also play back the audio/video using with the KENWOOD Smartphone Control iPod/iPhone/Android itself instead of the unit. application. For details, visit <http://www.kenwood.com/cs/ce>.
  • Page 27: Pandora

    Pandora® Pandora® (Only for (Only for DDX7017BT Region 4/DDX717WBT Region 4/DDX4017BT DDX7017BT Region 4/DDX717WBT Region 4/DDX4017BT) ) Operation buttons Playback operations You can stream Pandora from iPod touch/iPhone Displays the other operation button or Android devices. window. You can operate Pandora using the remote •...
  • Page 28 Pandora® Pandora® ❏ Selecting a station from the list • You can change the page to display more Android™ items by pressing [ • Visit Google play and search for “Pandora” to Display the list selection screen. • The indicator appears on the left of the install.
  • Page 29: Spotify

    2 Track information Setup>. (Page 23) • Pressing [<] scrolls the text if not all of the text Select the device to use on the <APP For DDX7017BT Region 4/DDX717WBT Region 4/DDX4017BT: is shown. Setup> screen. (Page 49) Purchase KNA-RCDV331 separately. 3 Playing time Select “Spotify”...
  • Page 30 Spotify Spotify ❏ Creating your station (Start Radio) ❏ Selecting a track Requirements for Spotify Display the Spotify menu screen. iPhone or iPod touch • Install the latest version of the Spotify application on your iPhone or iPod touch. (Search for “Spotify” in the Apple iTunes App Store to find and install the most recent version.) Select the list type (<Your Music>/...
  • Page 31: Radio

    RADIO RADIO Operation buttons Searches for a station. [S] [T] Listening to the radio Displays the other operation button • The search method differs ❏ Indications and buttons on the source window. according to the selected seek • To hide the window, press [ mode.
  • Page 32 RADIO RADIO ❏ Tuning in FM stations only with strong ❏ Setting the antenna control (only for Presetting stations signals — Local Seek DDX717WBT/DDX717WBTM) ❏ Storing stations in the memory • The antenna is extended regardless of the setting Display the <Radio Mode> screen. You can preset 5 stations for each band.
  • Page 33 RADIO RADIO ❏ Selecting a preset station ❏ Activating/deactivating TI/News FM Radio Data System features Standby Reception Select the band (1), then display the ❏ Searching for FM Radio Data System TI Standby Reception preset station window (2). programs—PTY Search You can search for your favorite programs being broadcast by selecting the PTY code.
  • Page 34 RADIO RADIO ❏ Tracing the same program—Network- ❏ Automatic TI station seek—Auto TP News Standby Reception Display the <Radio Mode> screen. Tracking Reception Seek (Page 32) When driving in an area where FM reception is not When traffic information station reception is poor, sufficient enough, this unit automatically tunes in to the unit automatically searches for another station another FM Radio Data System station of the same...
  • Page 35: Other External Components

    OTHER EXTERNAL COMPONENTS OTHER EXTERNAL COMPONENTS Using camera • To connect a camera, see page  71. • To use a rear view camera, a REVERSE lead connection is required. (Pages  67 – 69) ❏ Settings for the camera Rear view camera setting Display the <Input>...
  • Page 36 MENU on the monitor panel, then select [Camera]. • Each time you touch the area shown above, the screen is switched between the rear view screen On the monitor panel : and the front view screen. DDX7017BT/ DDX7017BTM On the monitor panel : (Hold) DDX7017BT/...
  • Page 37 OTHER EXTERNAL COMPONENTS OTHER EXTERNAL COMPONENTS ❏ Using the parking guidelines on the To adjust the picture While the camera screen is displayed... rear view screen You can display parking guidelines to enable easier parking when you shift the gear to the reverse (R) position.
  • Page 38: Using External Audio/Video Players-Av-In

    OTHER EXTERNAL COMPONENTS OTHER EXTERNAL COMPONENTS Make sure that A and B are horizontally ❏ Changing the AV-IN name Adjusting the parking guidelines parallel, and that C and D are the same length. Adjust the parking guidelines according to the size You can change the AV-IN name displayed on the of the car, parking space and so on.
  • Page 39: Using A Smartphone-Mirroring

    OTHER EXTERNAL COMPONENTS OTHER EXTERNAL COMPONENTS ❏ Displaying the screen of the Using a smartphone—Mirroring Watching a TV (Only for DDX7017BT/ smartphone (Only for DDX7017BT/DDX7017BTM/ DDX7017BTM/DDX717WBT/DDX717WBTM) You can display the screen of smartphones DDX717WBT/DDX717WBTM) connected via the HDMI/MHL input terminal.
  • Page 40: Using The External Navigation Unit

    OTHER EXTERNAL COMPONENTS OTHER EXTERNAL COMPONENTS When receiving a call during navigation guidance Display the <Navigation> screen. Using the external navigation unit The screen is switched automatically. To return to You can connect a navigation unit (KNA-G610 or the navigation screen, press [ KNA-G630: optional accessory) to the NAV input terminal so that you can view the navigation screen.
  • Page 41: Bluetooth

    BLUETOOTH BLUETOOTH Auto pairing About mobile phones compatible with Phone Information for using Bluetooth® When <Auto Pairing> is set to [ON], iOS devices Book Access Profile (PBAP) devices (such as iPhone) are automatically paired when If your mobile phone supports PBAP, you can connected via USB.
  • Page 42 BLUETOOTH BLUETOOTH Pairing a Bluetooth device using a PIN code (for Change the PIN code. Select the unit (“DDX****”) on your Bluetooth 2.0) • If you wish to skip changing the PIN code, go Bluetooth device. to step 3. Display the <Bluetooth Setup> screen. •...
  • Page 43 BLUETOOTH BLUETOOTH ❏ Connecting/disconnecting a registered • When a Bluetooth mobile phone is connected,  Select [ON] (to connect) or [OFF] (to the signal strength and battery level are displayed Bluetooth device disconnect) for the target (1), then display when the information is acquired from the device. the <Paired Device List>...
  • Page 44 BLUETOOTH BLUETOOTH ❏ Ending a call ❏ Switching between handsfree mode Using a Bluetooth mobile phone and phone mode While talking... ❏ Receiving a call While talking... When a call comes in... ❏ Adjusting the volume of calls/earpiece/ • Call information is displayed if acquired. microphone •...
  • Page 45 BLUETOOTH BLUETOOTH ❏ Sending text during a call ❏ Making a call • You can display the <Bluetooth Setup> screen by pressing [ You can send text during a call using the DTMF (Dual Display the phone control screen. Tone Multi Frequency) function. * When the mobile phone is not compatible with Phone Book On the Home screen: Access Profile (PBAP), the call history and the phone book are not...
  • Page 46 BLUETOOTH BLUETOOTH • To use the A to Z search in the phone book: • To display other phone numbers: Voice dialing When the phone book list is displayed, you can • Available only when the connected mobile phone switch between phone numbers if several phone has a voice recognition system.
  • Page 47 BLUETOOTH BLUETOOTH ❏ Presetting phone numbers Operation buttons Using the Bluetooth audio player Displays the other operation button You can preset up to 5 phone numbers. window. Display the phone control screen. • To register a new device, see page 41. •...
  • Page 48 BLUETOOTH BLUETOOTH ❏ Selecting an audio file from the menu <Device Shows the device address of the unit. Address> <Auto • ON (Initial): A connection is Connect> automatically established with the last connected Bluetooth device when the unit is turned on. Select a category (1), then a desired item •...
  • Page 49: Settings

    HDMI/MHL input terminal and via Bluetooth. (Go to step 4.) • If the device is already connected, skip step 1. * Appears only for DDX7017BT/DDX7017BTM/DDX717WBT/ DDX717WBTM. • If [Enter] for <APP Setup> cannot be selected, put the unit in standby. (Page 10)
  • Page 50: Sound Adjustment

    Put the unit in standby. (Page 10) Display the <Equalizer> screen. Display the <X’over Network> screen. On the Home screen: • For DDX7017BT/DDX7017BTM: Press MENU and MUTE on the monitor panel at the same time. The adjustments are stored and <User> is •...
  • Page 51 (2), then display <TW FREQ> Adjusts the crossover the <X’over> screen (3). Preparation: frequency for the tweeter. * Only for DDX7017BT/DDX7017BTM/DDX717WBT/ <Gain> Adjusts the output volume of DDX717WBTM: Select the appropriate crossover the selected speaker. network mode beforehand. (Page 50) <HPF FREQ>...
  • Page 52 SETTINGS SETTINGS ❏ Adjusting the Digital Time Alignment Select an item to make an adjustment. Determining the value for <Position DTA> (DTA) adjustment If you specify the distance from the center of the Make fine adjustments to the delay time of currently set listening position to every speaker, the speaker output to create a more suitable the delay time will be automatically computed...
  • Page 53: Adjustment For Video Playback

    SETTINGS SETTINGS Select the aspect ratio. <Bright> Adjusts the brightness. (−15 Adjustment for video playback to +15) ❏ Adjusting the picture <Contrast> Adjusts the contrast. (−10 to +10) You can adjust the picture quality. <Black> Adjusts the blackness. (−10 to Display the picture adjustment screen.
  • Page 54: Changing The Display Design

    SETTINGS SETTINGS ❏ Zooming the picture Select a background/panel color. Changing the display design To select a background You can zoom the picture (<Full>, <Zoom1> to You can change the background and panel color. <Zoom3>). Display the <User Customize> screen. •...
  • Page 55 SETTINGS SETTINGS ❏ Making your own color adjustment ❏ Storing your own scene for the Adjust the image. background image Select [Panel Color] on the <User While playing a video or picture, you can capture an Customize> screen. (Page 54) image and use the captured image as a background. •...
  • Page 56: Customizing The Home Screen

    SETTINGS SETTINGS Customizing the Home screen Customizing the system settings You can arrange the items to display on the Home ❏ Memorizing/recalling the settings screen. • You can memorize the settings changed in the Display the <Home Customize> screen. <Setup> menu and recall the memorized settings On the Home screen: any time.
  • Page 57 • Do not disconnect the USB device while updating. • If the update has failed, perform the following, then retry the update. For DDX7017BT/DDX7017BTM: – If [AV OFF] for <Manual Power Off> is selected, turn off the ignition switch, then turn on the ignition switch.
  • Page 58: Setting Menu Items

    SETTINGS SETTINGS ❏ Adjusting the touch position (Only for Touch the center of the marks at the upper Setting menu items DDX4017BT/DDX417BT/DDX417BTM) left (1), the lower center (2), then the ❏ Displaying the <Setup> menu screen upper right (3) as instructed. You can adjust the touch position on the touch panel if the position touched and the operation performed do not match.
  • Page 59 SETTINGS SETTINGS ❏ <Audio> setting screen • Supreme* : Restores the sound lost due to audio <Time Alignment> compression to a realistic sound. Select the listening position, then adjust the delay <Equalizer> – OFF/ON (Initial) time of the speaker output to create a more suitable Change the sound mode or adjust and store the •...
  • Page 60 • OFF (Initial): Select this to use “AV-IN” with the • OFF: Cancels. other component than TV Tuner. Pressing [<] scrolls the text regardless of this setting. <Home Customize> * Only for DDX7017BT/DDX7017BTM/DDX717WBT/DDX717WBTM. Change the items to display on the Home screen. (Page 56)
  • Page 61 For DDX717WBT/DDX717WBTM: Turn off the ignition switch, then Configure the App setup. (Page 49) turn on the ignition switch. For DDX4017BT/DDX417BT/DDX417BTM: Turn off the power of the unit, then turn on the power of the unit. Only for DDX4017BT/DDX417BT/DDX417BTM. Only for DDX7017BT/DDX7017BTM. ENGLISH...
  • Page 62: Remote Controller

    CDs etc. with the player integrated in this unit. You can also operate this unit from Smartphone TV mode: Not used. using KENWOOD Remote APP. For details, visit <http://www.kenwood.com/cs/ce/>. • The position of the remote control mode switch is indicated in the title of each mode, e.g., “AUD...
  • Page 63 REMOTE CONTROLLER REMOTE CONTROLLER ❏ DVD/VCD (DVD mode) ❏ Music Disc/Audio file/Video file/Picture ❏ iPod/Android (AUD mode) file (AUD mode) Moves the cursor when displaying a Selects music/videos. J/K/H/I menu. AM –/FM + Selects a folder. Starts/pauses playback. Selects a track. Selects a track/file.
  • Page 64 REMOTE CONTROLLER REMOTE CONTROLLER • The unit can register/change all of the buttons’ Display the <Steering Remote Control Using the steering remote functions at the same time. To do this, press each Setting> screen. controller button in turn and after pressing all of them, •...
  • Page 65: Connection/Installation

    • Do not press hard on the panel surface when start a fire. Always connect those wires to the • Only for DDX7017BT/DDX7017BTM/DDX717WBT/ installing the unit to the vehicle. Otherwise power source running through the fuse box.
  • Page 66 9 Screws for the fixture (M2.6 x 6 mm) x 1 * Connect the wiring harness wires in the 4 or 5 following order: ground, battery, ignition. Only for DDX7017BT Region 4/DDX4017BT. • Select the appropriate type of screw for the Only for DDX7017BT/DDX7017BTM/DDX4017BT/DDX417BT/ Connect the wiring harness connector to mounting bracket: flat head (4) or round head DDX417BTM.
  • Page 67 CONNECTION/INSTALLATION CONNECTION/INSTALLATION Connection ❏ Connecting wires to terminals for DDX4017BT/DDX417BT/DDX417BTM * If no connections are made, do not let the cable come out from the USB terminal (1.0 m): See page 70. tab. See page 71. 10 A fuse Connect the antenna cord to the antenna terminal.
  • Page 68 CONNECTION/INSTALLATION CONNECTION/INSTALLATION ❏ Connecting wires to terminals for DDX7017BT/DDX7017BTM See page 71. Connect the antenna cord to the antenna terminal. 10 A fuse Connect to the vehicle’s reverse lamp harness when using the optional rear view camera. Purple with white stripe (Reverse sensor wire) See page 71.
  • Page 69 CONNECTION/INSTALLATION CONNECTION/INSTALLATION ❏ Connecting wires to terminals for DDX717WBT/DDX717WBTM (for Toyota Cars) If no connections are made, do not let the cable come out from the tab. See page 71. For 3 way speaker system connection, see also page 72. See page 72. Connect the antenna cord to the antenna terminal.
  • Page 70 Adapter to use smartphone/iPod/ 1.0 m (optional accessory) 1.0 m iPhone over a wireless connection (only for DDX7017BT/DDX7017BTM/ DDX717WBT/DDX717WBTM) When connecting to the HDMI/ MHL connector, fix the HDMI/ Wireless Display Adapter: KCA-WL100 (optional accessory) MHL cable using the fixture (8) and screw (9).
  • Page 71 (REMO IN / REMO-IN) (commercially available) (commercially available) • Connect to the vehicle’s steering remote harness using the Steering Remote cable (6). Contact your Kenwood dealer for details. 4 iPod/Audio Video input (iPod/AV-IN)* 5 HDMI/MHL input 6 Rear preout* Micro USB Micro HDMI (Type D) •...
  • Page 72 CONNECTION/INSTALLATION CONNECTION/INSTALLATION ❏ Connecting microphone for Bluetooth Connecting external amplifiers for a 3 way speaker system Connect the microphone (7) to the MIC terminal. • To install the microphone, peel off the adhesive tape, fix on the installation position, then adjust the direction of the microphone to face the driver.
  • Page 73: References

    REFERENCES REFERENCES ❏ To keep discs clean Maintenance More information Dirty discs may not play correctly. ❏ Caution on cleaning the unit ❏ File playback If a disc does become dirty, wipe it with a soft cloth Do not use any solvent (for example, thinner, in a straight line from the center to the edge.
  • Page 74 REFERENCES REFERENCES Playing audio files (MP3/WMA/WAV/AAC/FLAC) • This unit can display jacket pictures that meet the DVD Region code: • This unit can play back files with the extension conditions below: For DDX 7017BT/DDX717WBT: 3/4 code: – Picture size: 32 x 32 to 1 232 x 672 resolution For DDX7017BTM/DDX717WBTM/DDX417BTM: 2 –...
  • Page 75 REFERENCES REFERENCES ❏ Notes on playing iPod/iPhone Playing Recordable/Rewritable discs Notes on using a USB device: • This unit can recognize a total of 5 000 files and • This unit may not play back files in a USB device • iPod/iPhone that can be connected to this unit: 250 folders (a maximum of 999 files per folder).
  • Page 76 ❏ Language codes (for DVD language selection) • When operating an iPod/iPhone, some operations may not be performed correctly or as intended. In Afar Galician Maori Somali this case, visit the following KENWOOD web site: Abkhazian Guarani Macedonian Albanian <www.kenwood.com/cs/ce/ipod> Afrikaans...
  • Page 77: Error Message List

    REFERENCES REFERENCES “Connection Error”: “Please check device.”: Error message list • The device is registered but the connection has • The Pandora application on your iPod touch/ failed. Connect the registered device. (Page 43) iPhone/Android is not started up. If an error occurs while using the unit, a message •...
  • Page 78: Troubleshooting

    [BROWSE MODE]. No picture is displayed on the screen. • Make sure KENWOOD Music Play APP is installed play. • Turn on the screen. (Page 10) • Playback order may differ from the one played on the Android device.
  • Page 79 If the PIN code of the device is not Videos cannot be played. indicated in its instructions, try “0000” or “1234.” * Only for DDX7017BT Region 4/DDX717WBT Region4/DDX4017BT. • Connect with USB Audio and Video cable • Turn off, then turn on the Bluetooth device.
  • Page 80: Specifications

    REFERENCES REFERENCES ❏ DVD player section ❏ HDMI interface section (only Echo or noise occurs. • Adjust the microphone unit position. for DDX7017BT/DDX7017BTM/ D/A Converter 24 bit • Adjust the echo volume or noise reduction DDX717WBT/DDX717WBTM) Audio Decoder Linear PCM/Dolby Digital/MP3/ volume.
  • Page 81 –8/–7/–6/–5/–4/–3/–2/–1/0 dB SDP (Service Discovery Profile) 100/120/150/180/220/250/ Subwoofer (LPF): SPP (Serial Port Profile) 1.2 Through Frequency (Hz) 30/40/50/60/70/80/90/ Slope –6/–12 dB/Oct. aptX is compatible only with DDX7017BT Region 4/DDX717WBT 100/120/150/180/220/250/ Phase Normal/Reverse Region 4. Through Only for DDX7017BT/DDX7017BTM/DDX717WBT/DDX717WBTM. Gain –8/–7/–6/–5/–4/–3/–2/–1/0 dB Slope –6/–12/–18/–24 dB/Oct.
  • Page 82 DDX717WBTM: 2.3 kg DDX417BT: 531 kHz to 1 611 kHz Preout Level 4 V/10 kΩ DDX7017BT Region 4/DDX717WBT Region 4/ DDX7017BT Region 4: Preout Impedance DDX4017BT: 531 kHz to 1 701 kHz ≤ 600 Ω 2.3 kg (including trim plate)
  • Page 83 Bluetooth SIG, Inc. and any CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT standards. Please note that the use of this use of such marks by JVC KENWOOD Corporation is LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS accessory with iPod, or iPhone may affect wireless under license.

Table of Contents