Table of Contents
Advertisement
Components Name and Basic Operations
Putting the unit in standby
1
Display the source/option selection
screen.
From the Home screen (page 4), touch as
follows:
ell~
···v
2
Put the unit
in
standby.
On
the source/option selection screen (page 1 O):
C)
[STANDBY~
■
On the monitor panel
-
• □ISP
-
OFF
-
M EN~
~-(Hold)
To turn on the screen:
Press the
DISP OFF
button on
the monitor panel or touch the screen.
■
On the pop-up menu
[DisplayO~
To turn on the
screen:
Touch
the screen.
Adjusting the volume
VOL
You can adjust the volume (00 to 40)
by pressing VOL
...,.
to increase and
pressing
VOL
T
to decrease.
• When volume level is below 15,
holding VOL
...,.
increases the
volume continuously to level 15.
Attenuating the sound
On the source control screen:
To cancel attenuation:
Initial settings
When you power on the unit for the first time or
initialized, the
<Initial Setup>
screen appears.
Perform the initial settings.
~
Initial Setup
Once completed, Home screen appears.
<Demonstration>
• ON
(Initial): Activates the display demonstration.
•
OFF:
Deactivates the display demonstration.
<
Language>
Select the text language used for on-screen
information.
. English (lnitial)/Espanol/Fran~ais
. GUI Language (Local
(the language selected above)
(lnitial)/English):
Selects the language used for
displaying operation keys and menu items.
<Front Camera>
Make the settings to display the picture from the
connected front view camera.
<Rear Camera>
Make the settings to display the picture from the
connected rear view camera.
<User Customize>
Change the display design.
<Viewing Angle>
Select the viewing angle in relation to the monitor to
make the image on the screen easier to see.
· Under0° (lnitial)/5°/10°/15°/20°
ENGLISH
CD
Advertisement
Table of Contents
