Usb/Ipod; Connecting A Usb Device; Connect Ipod/Iphone - Kenwood DMX958XR Quick Start Manual

USB/iPod

Connecting a USB device

1
Connect the USB device via the USB
terminal. (P.27)
2
Press the [HOME] button.
3
Touch [
].
4
Touch [USB]. (P.11)
Ñ
Disconnect the USB device
1
Press the [HOME] button.
2
Touch a source other than [USB].
3
Detach the USB device.
Ñ
Usable USB device
You can use a mass-storage-class USB device
with this unit.
The word "USB device" appearing in this manual
indicates a flash memory device.

Connect iPod/iPhone

Preparation
• With an iPhone compatible with Apple CarPlay,
turn off Apple CarPlay by operating the iPhone
at functional setup before connecting iPhone.
For details of the setup method, contact the
manufacturer of the terminal.
• Only one iPod/iPhone can be connected.
Wired connection
Preparation
• Connect an iPod/iPhone while Apple CarPlay is
not connected.
1
Connect your iPod/iPhone via the USB
terminal by the following methods.
(P.28)
• Connect using KCA-iP103 (optional
accessory) and USB adaptor.
• Connect using USB-C to Lightning cable
(sold separately).
● To disconnect the iPod/iPhone connected
with the cable
1
Detach the iPod/iPhone.
Bluetooth connection
Pair the iPhone through Bluetooth.
Preparation
• To connect an iPhone via Bluetooth, register it
as a Bluetooth device and do the profile setting
for the connection beforehand. See Register the
Bluetooth device (P.17).
• Connect an iPhone via Bluetooth while Apple
CarPlay and an iPod/iPhone are not connected
via USB.
USB/iPod
13
English