NEC PA803U User Manual page 188

*1 Effective pixels are more than 99.99%.
*2 This is the light output value (lumens) when the [PRESET] mode is set to [HIGH-BRIGHT]. The light output values will drop to
80% when [ON] is selected for [ECO MODE]. If any other mode is selected as the [PRESET] mode, the light output value may
drop slightly.
*3 Compliance with ISO21118-2012
*4 If you are unable to view material via the HDMI input, this does not necessarily mean the projector is not functioning properly. With
the implementation of HDCP, there may be cases in which certain content is protected with HDCP and might not be displayed
due to the decision/intention of the HDCP community (Digital Content Protection, LLC).
Video: HDR, Deep Color, 8/10/12-bit, Lip Sync.
Audio: LPCM; up to 2 ch, sample rate 32/44.1/48 KHz, sample bit; 16/20/24-bit
HDMI: Supports HDCP2.2/1.4
DisplayPort: Supports HDCP 1.4
HDBaseT: Supports HDCP 2.2/1.4
*5 95 to 104°F (35 to 40°C) – "Forced eco mode"
• These specifications and the product's design are subject to change without notice.
Option lens (sold separately)
NP11FL Throw ratio 0.81:1, F2.3, f=13.2mm
NP12ZL Throw ratio 1.16 - 1.52:1, F2.20 - 2.69, f=19.4 - 25.3mm
NP13ZL Throw ratio 1.46 - 2.95:1, F1.70 - 2.37, f=24.4 - 48.6mm
NP14ZL Throw ratio 2.90 - 4.68:1, F2.20 - 2.64, f=48.5 - 77.6mm
NP30ZL Throw ratio 0.79 - 1.04:1, F1.90 - 2.10, f=13.2 - 17.2mm
NP40ZL Throw ratio 0.79 - 1.10:1, F2.00 - 2.43, f=13.3 - 18.6mm
NP41ZL Throw ratio 1.30 - 3.02:1, F1.70 - 2.00, f=21.8 - 49.8mm
NP42ZL Throw ratio 2.99 - 5.98:1, F2.20 - 2.30, f=49.6 - 100.0mm
NOTE:
• The above throw ratio is for projecting on 100" screen by WUXGA.
• NP40ZL and NP42ZL will be available on market in April 2017. The values for these lens on this manual are tentative, please
contact your dealer about their detailed information or refer to the latest user's manual uploaded on our web site.
• For using NP30ZL, set the ECO mode to ON.
• Use NP11FL at the home position.
174
8. Appendix