NEC PA803U User Manual page 101

Cutting a signal from the Entry List [
1. Press the ▲ or ▼ button to select a signal you wish to delete.
2. Press the ◀, ▶, ▲, or ▼ button to select [
The signal will be deleted from the Entry List and the deleted signal will be displayed on the clipboard at the bot-
tom of the Entry List.
NOTE:
• The currently projected signal cannot be deleted.
• When the locked signal is selected, it will be displayed in gray which indicates it is not available.
TIP:
• Data on the clipboard can be passed onto the Entry List.
• Data on the clipboard will not be lost after the Entry List is closed.
Copying and pasting a signal from the Entry List [
1. Press the ▲ or ▼ button to select a signal you wish to copy.
2. Press the ◀, ▶, ▲, or ▼ button to select [
The copied signal will be displayed on the clipboard at the bottom of the Entry List.
3. Press the ◀ or ▶ button to move to the list.
4. Press the ▲ or ▼ button to select a signal.
5. Press the ◀, ▶, ▲, or ▼ button to select [
Data on the clipboard will be pasted to the signal.
Deleting all the signals from the Entry List [
1. Press the ◀, ▶, ▲, or ▼ button to select [
The confirmation message will be displayed.
2. Press the ◀ or ▶ button to select [YES] and press the ENTER button.
NOTE: The locked signal cannot be deleted.
(CUT)]
(CUT)] and press the ENTER button.
(COPY)] / [
(COPY)] and press the ENTER button.
(PASTE)] and press the ENTER button.
(ALL DELTE)]
(ALL DELETE)] and press the ENTER button.
87
5. Using On-Screen Menu
(PASTE)]