Transport; Storage; Maintenance And Care; Emptying The Dirt Container - Kärcher NT 20/1 Me Classic Manual

Hide thumbs Also See for NT 20/1 Me Classic:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1

Emptying the dirt container

The vacuum channel is equipped with a
float.
When the dirt water reaches the highest
permissible level in the container, the
suction power is interrupted.
 Switch off the appliance at the main
switch.
 Release and remove the suction head.
 Remove permanent filter.
 Empty the dirt container.
Turn off the appliance
 Switch off the appliance at the main
switch.
 Pull out the mains plug.
After each operation
 Empty the dirt container.
 Vacuum and wipe the appliance inside
and outside with a damp cloth.
Storing the Appliance
Illustration
 Store the suction pipes, the suction
hose and the mains cable as shown in
the illustration.
 Place the appliance in a dry room and
secure it from unauthorized use.

Transport

Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
Illustration
 Transport the appliance as shown in the
illustration.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

Maintenance and care

Danger
First pull out the plug from the mains before
carrying out any tasks on the machine.
Replace fleece filter
Note: The fleece filter can be washed at
40 °C.
 Release and remove the suction head.
 Remove permanent filter.
 Pull the fleece filter off the main filter
basket.
 Pull the new or washed fleece filter over
the retaining collar of the main filter bas-
ket.
 Insert permanent filter.
 Insert and lock the suction head.
Change cartridge filter
 Release and remove the suction head.
 Turn the suction basket by 180° and
keep it aside.
 Unlock the fastening clip.
 Remove the cartridge filter.
 Insert the new cartridge filter.
 Insert and lock the fastening clip.
 Insert and lock the suction head.
– 3
EN

Storage

7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nt 30/1 me classicNt 38/1 me classic

Table of Contents