Remove The Mainboard; Remove The Battery Holder/Battery Pack - Casio DT-X5M10E Service Manual

Removing the Mainboard
1. Remove the battery holder/battery pack (see page 9), separate the front and rear case assemblies (see page
10) and remove the 1D laser assembly (see page 12).
1
2. Remove screws
3. Carefully ease up the mainboard and release cables
4. Lift the mainboard
4
- from the mainboard.
, off the front case assembly.
7
Figure 2 - 5 - Removing the Mainboard
7. Mainboard
• 4 Screws
5 & 6 from their locking collars.
— 13 —