Wall With Inclined Support Supplied; Flush-Mounted With The Accessories Of The Multifunction Multibox Boxes - Bticino terraneo Installation Instructions Manual

Terraneo
5 INSTALLATION
Wall mounted with inclined support supplied
● Connect the braided wire (1) supplied with the
system referring to the table below and fitting the
RJ connector in place (2).
COLOUR
1
YELLOW
2 GREEN
3
4
5 BROWN
6
7
8
● Fasten the inclined support to the wall putting the
screws in the correct place, then fit the porter
Switchboard on the support.
Flush mounted with accessories for the Multifunction Multibox boxes
● Fasten the box item 16102 in the wall and
mount the chassis item 16102LT with
supports item 16121
● Connect the braided wire (1) supplied with the
system referring to the table below and fitting the
RJ connector in place (2).
COLOUR
1
YELLOW
2 GREEN
3
4
5 BROWN
6
7
8
● Fasten the porter Switchboard on the chassis,
fastening the chassis to the box with the screws
supplied and finish by fitting the finishing frame
BLUE
WHITE
RED
BLACK
GREY
BLUE
WHITE
RED
BLACK
GREY
67