4
Warnings
Before you begin programming, please read the important
safety warnings below.
•
Never go inside the drive enclosure. The capacitor bank holds a 230 volt charge,
even if there is no power to the unit.
•
Do not submerse the IntelliPro
•
The IntelliPro
is capable of 160 GPM or 104 feet of head. Use caution when
VS-3050
installing and programming to limit pump performance when plumbed with old or
questionable equipment.
•
IntelliPro
can be wired for constant power, or to the load side of a mechanical
VS-3050
time clock.
•
Always stop IntelliPro
VS-3050
performing maintenance.
.
VS-3050
and disconnect the communication cable before
™
IntelliPro
Quick-Start Guide
VS-3050