Advertisement
To Prime the
IntelliPro
VS-3050
8
Turn the pump clamp and lid in a counterclockwise direction until they stop, and remove.
Fill the pump strainer pot with water.
Reinstall the pump clamp and lid onto the strainer pot. The pump is now ready to prime.
Make sure all electrical connections are clean and tight.
Re-open all closed valves.
Open the air release valve on the filter, and stand clear of the filter.
Switch IntelliPro
on at the circuit breaker. Ensure that the green power light is on.
VS-3050
Press the Speed 4 button to select pump speed of 3110 RPM.
Press the Start button.
Use the Up/Down button to increase speed as necessary to prime the pump.
When water comes out of the air release valve, close the valve. The system should now be
circulating water back to the pool without air bubbles showing in either the hair and lint pot
or at the pool return fittings.
™
IntelliPro
Quick-Start Guide
VS-3050
Hide quick links:
Advertisement
