Wiring Diagrams - Transmitter Solutions Wi-Enterprise Installation & User Manual

Wiring Diagrams

8
Wiring Diagrams
Warning : Installation should only be carried out
by a suitably qualified person only.
Cable Tie
Cable Tie
retaining
clips
Note : Used ONLY for
Wired 485 Network
Connections.
Door Network
IP1
Main Input Cable
IP2
230VAC
0V
IP3
IP4
12V
OP1
Remove Battery Tab
OP2
OP3
OP4
0V
VOUT
DAT
CLK
SEN
Neutral
Earth
Live
Fuse Rating : 230VAC 315mA
PC Network Connections
can be used for multiple
controllers See page
10 for wiring
PC Direct
PC Network
Pull
3V Lithium
TCP_IP
Enrolling User FingerPrints
Step Description
Note: Make sure the USB Fingerprint reader is attached to the PC
1. On the Users Tab , Select a User for fingerprint enrolment
2. Click on the 'Fingerprints' button.
3. Click on '+' button to begin and place finger on the enrolment reader. An
image of the fingerprint will appear on the screen. Ensure that the image
quality is good and a value of at least 90% is achieved. Refer to section
'Finger Placement' for correct finger placement and example of good
quality image. Repeat this process if this is not achieved on first attempt.
Two fingerprint templates can be saved for each user.
4. Click 'Save' using a good quality template only. Poor Quality templates can
lead to false rejections later when trying to gain access
21
Operation Instructions