Transmitter Solutions Wi-Enterprise Installation & User Manual page 7

22 Finger Placement Wi-BIO
Correct Finger Placement
Note: Ensure that the core of finger is
centered on the sensor window during
the enrollment process. This will increase
the quality of the fingerprint template.
Ensure a value of at least 90% is achieved.
Note: Good Quality image, Fingerprint core
is center of sensor window
Note: The System does not store the finger
print. It uses an algorithm to generate a
binary representation using sample points
from the fingerprint. It uses this information
to then validate each users fingerprint.
Good Quality Image
Wireless Connection to Door Controls
Note: If using a single Controller,
an RS232 cable may be used.
Max cable length 10 meters
Door Control
#1
Door Control
#2
Note: Door Controls can be installed within 30 meters
of the Controller or within 30 meters of any other Door Control
as each Door Control will function as a repeater. Each Door Control
transmits data to/from the Controller. These distances are a guideline.
The actual communication range depends on building shape and
construction methods used.
System Overview
TCP-IP connection to Controllers
or
RS485 Network to Controllers
Max number of Controllers 3
Max Cable Length 1.4 km
Controller
#2 - 3
Controller
#1
Door Control
#4
Door Control
#3
Door Control
#5 - 20
7