System Overview - Transmitter Solutions Wi-Enterprise Installation & User Manual

6

System Overview

RS485 Connection to Door Controls
Note: If using a single Controller,
an RS232 cable may be used.
Max cable length 10 meters
Place a 120ohm
Termination Resistor
across A & B on the
Controller
RS485 Network to Door Controls
Max Cable Length 1.4 km.
Daisy Chain Configuration Only.
Door Control Door Control
#1 #2
TCP-IP connection to Controllers
or
RS485 Network to Controllers
Max number of Controllers 3
Max Cable Length 1.4 km
Controller
#2 - 3
Controller
#1
Place a 120ohm
Termination Resistor
across A & B on the last
Door Control in the chain.
Door Control Door Control
#3 #4 - 20
Incorrect Finger Placement
Note: Incorrect placement : finger does not
fully cover the sensor window.
Note: Poor Quality image, No Fingerprint
core on sensor window.
This can result in poor template quality that
can lead to false rejection issues later when
the user is trying to gain access.
Finger Placement Wi-BIO
Poor Quality Image
23