Linux Clients; Fixed Ip Address; To Act As A Dhcp Client; Other Unix System Clients - PROLiNK PWH2004 User Manual

®
PROLiNK PWH2004 User Manual
5.4

Linux Clients

To access the Internet via the Wireless Router, it is only necessary to set the Wireless Router as the
"Gateway".
Ensure you are logged in as "root" before attempting any changes.

5.4.1 Fixed IP Address

By default, most Unix installations use a fixed IP Address. If you wish to continue using a fixed IP Address,
make the following changes to your configuration.
• Set your "Default Gateway" to the IP Address of the Wireless Router.
• Ensure your DNS (Domain Name server) settings are correct.
5.4.2 To act as a DHCP Client (Recommended)
The procedure below may vary according to your version of Linux and X -windows shell.
1. Start your X Windows client.
2. Select Control Panel – Network.
3. Select the "Interface" entry for your Network card. Normally, this will be called "eth0".
4. Click the Edit button, set the "protocol" to "DHCP", and save this data.
5. To apply your changes:
• Use the "Deactivate" and "Activate" buttons, if available.
•
OR, restart your system.
5.5

Other Unix System Clients

To access the Internet via the Wireless Router:
• Ensure the "Gateway" field for your network card is set to the IP Address of the Wireless Router.
•
Ensure your DNS (Name Server) settings are correct.
Revision 1.0 (Aug'09) 47
www.prolink2u.com