PROLiNK PWH2004 User Manual page 34

®
PROLiNK PWH2004 User Manual
Repeater Mode
Revision 1.0 (Aug'09)
If the Repeater mode be selected, set up Wireless MAC address to each other to enable
WDS function.
Phy Mode: Select CCK, OFDM, HTMIX or GREENFIELD from the pull-down
menu. Each AP should be setup to the same Phy mode.
AP1~AP4 Encrypt Type: Users should go to the main web page of the Wireless
Router Wireless settings Security page to set up security
mode under Open, Shared, WEP Auto, WPA, WPA-PSK, WPA2,
WPA2-PSK, WPA-PSK/ WPA2-PSK, WPA/WPA2.
Select NONE, WEP, TKIP and AES encryption type from pull-
down menu. (Default encryption type is NONE.)
Encrypt Key: Enter the corresponding encryption keys in the field. Select
the type of Open, Shared, WEP Auto authentication, for WEP
encryption.
•
•
•
•
Select the type WPA, WPA-PSK, WPA2, WPA2-PSK, WPA-PSK/
WPA2-PSK, WPA/WPA2 authentication, for TKIP or AES
encryption. If users select TKIP or AES encryption, please
enter the password in the Encryption Key column that must be
filled with characters longer than 8 and less than 64 lengths to
set up the security.
AP1~AP4 MAC Address: Enter Wireless MAC of each other to make the WDS
connection.
32
Hexadecimal (WEP 64 bits): 10 Hex characters (0~9, a~f).
Hexadecimal (WEP 128 bits): 26 Hex characters (0~9, a~f).
ASCII (WEP 64 bits): 5 ASCII characters (case-sensitive).
ASCII (WEP 128 bits): 13 ASCII characters (case-sensitive).
www.prolink2u.com