PROLiNK PWH2004 User Manual page 33

®
PROLiNK PWH2004 User Manual
Bridge Mode
Revision 1.0 (Aug'09)
If the Bridge mode be selected, set up Wireless MAC address to both APs to enable
WDS function.
Phy Mode: Select CCK, OFDM, HTMIX or GREENFIELD from the pull-down
menu. Each AP should be setup to the same Phy mode.
AP1~AP4 Encrypt Type: Users should go to the main web page of the Wireless
Router Wireless settings Security page to set up security
mode under Open System, Shared Key, AUTO(Open/Shared),
WPA, WPA-PSK, WPA2, WPA2-PSK, WPA-PSK/ WPA2-PSK,
WPA/WPA2.
Select NONE, WEP, TKIP and AES encryption type from pull-
down menu. (Default encryption type is NONE.)
Encrypt Key: Enter the corresponding encryption keys in the field. Select
the type of Open System, Shared Key, AUTO(Open/Shared)
authentication, for WEP encryption.
•
•
•
•
Select the type WPA, WPA-PSK, WPA2, WPA2-PSK, WPA-PSK/
WPA2-PSK, WPA/WPA2 authentication, for TKIP or AES
encryption.
If users select TKIP or AES encryption, please enter the
password in the Encryption Key column that must be filled
with characters longer than 8 and less than 64 lengths to set
up the security.
AP1~AP4 MAC Address: Enter Wireless MAC of each other to make the WDS
connection.
31
Hexadecimal (WEP 64 bits): 10 Hex characters (0~9, a~f).
Hexadecimal (WEP 128 bits): 26 Hex characters (0~9, a~f).
ASCII (WEP 64 bits): 5 ASCII characters (case-sensitive).
ASCII (WEP 128 bits): 13 ASCII characters (case-sensitive).
www.prolink2u.com