Power One aurora Installation And Operation Manual page 6

Installation and Operation Manual
(PVI-3.8/4.6-I-OUTD-US Rev.: 1.1)
OPERATION
Systems with inverters should be provided with additional control and protective
devices in compliance with the corresponding prevailing safety rules, such as those
relating to the compliance with technical equipment, accident-prevention regulations,
etc. Calibration changes are permitted by means of the operating software. Anytime
that the inverter has been disconnected from the power network, powered parts and
electrical connections should not be touched as some capacitors could still be charged.
Consequently, comply with all corresponding marks and symbols present on each
device. Ensure that all covers and doors are closed during operation.
MAINTENANCE AND SERVICE
The manufacturer's documentation must be complied with.
FIGURES AND IMAGES ON THIS MANUAL
Some of the images on this manual are from prototypes and only as example. The real
unit may differ in some particular from images.
KEEP ALL DOCUMENTS IN A SAFE PLACE!
Page 6 of 104