Advertisement
IR TALKBACK CONTROL
Users can control the matrix via the IR call back system.
This function can be disabled or enabled.
Enable the function- Default: (IR will pass-through, and will control matrix)
• Press the Output 2 and Output 4 buttons at the same time for 3 seconds.
• After all the Output LEDs flash once, the function is enabled.
Disable the function: (IR will pass-through, but will not allow control of matrix)
• Press the Output 2 and Output 4 buttons at the same time for 3 seconds.
• After all the Output LEDs flash twice, the function is disabled.
IR WITH CAT5/6 RECEIVER
The 4x4 matrix can receive IR signals from the CAT5/6 extenders and pass the IR
signal to the appropriate HDMI source.
IR EMITTER
SOURCE 1
SOURCE 2
SOURCE 3
SOURCE 4
INPUT 1
INPUT 2
There are four IR emitter outputs. The IR outputs are linked to the source inputs
which allows for intelligent IR control of sources that might have the same IR
commands. For example: If Output 1 selects Input 3, IR will only be sent to IR
Output 3. This is important when using multiple Cable boxes or SAT receivers
that operate with the same IR commands. Be sure to cover the emitters with
IR hoods to ensure IR bleed-over does not interfere with other devices.
RS232
EDID
INPUT 3
INPUT 4
PACKAGE CONTENTS
OPTIONAL ACCESSORIES:
• 4x4 Matrix Switcher
• 12VDC Power Supply
• 1 IR Remote Control.
• Rack ears for mounting
• Owner's Manual
2
2
1
FRONT PANEL
1. Output selector
2. Input indicator for Output port 1 to 4
3. IR window
4. Power switch
IR EMITTER
Cat 1
Cat 1
Cat 2
Cat 2
DC/12V
IR EXT.
SOURCE 1
SOURCE 2
HDMI
HDMI
CAT5/6
CAT5/6
INPUT 1
OUTPUT 1
OUTPUT 2
2
3
4
8
5
BACK PANEL
1. RS232 port.
2. Power input (12V DC @ 1Amp)
3. IR input for IR receiver
4. Output 1 and 2 with HDMI and CAT5/6
5. Source Input ports 1 to 4 with corresponding IR emitter
6. Output 3 and 4 with HDMI and CAT5/6
7. DIP switch for EDID setting
8. IR Outputs for corresponding inputs
• Binary™ HDMI 2 CAT Extenders
B-210-HDMATRIX-RECVR (x4)
• Episode® IR Receivers (for main unit and
each B-210-HDMATRIX-RECVR)
• Episode® IR Emitter Cables. (x4)
• Binary™ Cables B3-MonoMini (for IR)
3
4
RS232
EDID
Cat 1
Cat 1
Cat 2
Cat 2
SOURCE 3
SOURCE 4
HDMI
HDMI
CAT5/6
INPUT 2
INPUT 3
INPUT 4
OUTPUT 3
OUTPUT 4
1
7
6
CAT5/6
Advertisement
