Advertisement
IMPORTANT SAFETY INSTRUCTIONS
1. Read and follow all instructions and warnings in this manual.
Keep for future reference.
2. Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus (including amplifiers).
3. Do not install the unit near water or where moisture is present.
4. Clean with a dry cloth.
5. Unplug this apparatus during lightning storms or when unused for long
periods of time.
6. Protect the power cord from being walked on or pinched particularly at plug,
convenience receptacles, and the point where it exits from the apparatus.
7. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as when the power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
8. To completely disconnect this equipment from the AC mains, disconnect
the power supply cord plug from the AC receptacle.
CAUTION: To reduce the risk of electrical shock, inspect the premises carefully.
Do not use the unit if proper equipment grounding cannot be verified.
FEATURES
• Allows up to four HDMI audio/video devices to be independently switched to
four HDMI monitors, HDTVs, projectors, or multiple surround sound receivers.
• The four outputs can show the same or different sources simultaneously.
• The four outputs all include one HDMI-A connector and one dual RJ-45
connector. They can output simultaneously.
• Support high-definition resolutions 1080p (24/60 Hz), 1080i, 720p and other
standard video formats.
• Each port supports HDMI or DVI inputs.
• Port for external infrared receiver extension.
• Four switching modes: panel buttons, local IR, IR call back from remote
rooms, and RS232.
• IR emitter for IR call back function to control the HDMI source from remote rooms.
• HDCP compliant.
• CEC Compliant.
• HDMI 1.3 version.
DIP SWITCH FOR EDID SETTING
Position 1 Position 2
Position 3
EDID Auto mix: Simultaneously press and hold the
Output 1 and Output 4 buttons for three seconds to
initiate EDID mix. Lights will flash to confirm the EDID
auto mix is on. The matrix will mix the EDID data of all
HDMI sink devices that choose the same source, and
Off
Off
Off
forward this mixed EDID to the HDMI source device.
This allows all the connected device to have video and
audio they can display or output. For example, if one
TV is 1080p Stereo, and the other is 1080i 5.1 audio, the
mixed EDID will be 1080i Stereo Audio.
Copies the EDID data from the Output to the Input.
For example, when Output 3 selects Input 1, press
Off
Off
On
and hold the Output 3 button for three seconds and
the EDID information will be copied to Input 1. This
can be done for each input.
Off
On
Off
1080p video with Stereo audio (using embedded EDID)
1080i video with Stereo audio (using embedded EDID)
Off
On
On
This setting can be used when the display is an older
model that cannot support 1080p.
On
Off
Off
1080p video with 5.1 audio (using embedded EDID)
On
Off
On
1080p video with 7.1 audio (using embedded EDID)
* Refer to your TV's manual for maximum resolution and audio capabilities.
WARRANTY
2-Year Limited Warranty
This Binary™ Product has a Two-Year Limited Warranty. This warranty includes parts
and labor repairs on all components found to be defective in material or workmanship
under normal conditions of use. This warranty shall not apply to products which have
been abused, modified or disassembled. Products to be repaired under this warranty
must be returned to SnapAV or a designated service center with prior notification and
an assigned return authorization number (RA).
Function
Advertisement
