Apm Configuration - Asus VivoMini UN66 User Manual

Change Settings
Allows you to choose the setting for Super IO device.
Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h;
IRQ=4] [IO=2E8h; IRQ=3]

4.4.8 APM Configuration

ErP Ready
Allows you to switch off some power at S4+S5 or S5 to get the system ready for
ErP requirement. When set to [Enabled], all other PME options will be switched
off.
Configuration options: [Disabled] [Enabled(S4+S5] [Enabled(S5)]
Restore AC Power Loss
[Power On]
[Power Off]
[Last State]
Power On By PCI-E
Allows you to enable or disable the wake-on-LAN function for the onboard LAN
controller or other installed PCI-E LAN cards.
Configuration options: [Disabled] [Enabled]
Power On By Ring
[Disabled]
[Enabled]
50 VivoMini UN Series
The system goes into ON state after an AC power loss.
The system goes into OFF state after an AC power loss.
The system goes into either OFF or ON state, whatever the
system state was before the AC power loss.
Disables the Ring devices to generate a wake event.
Enables the Ring devices to generate a wake event.