Table of Contents
Advertisement
3.
2pin power connector (2-pin AUX_PWR)
This power connector is used to power custom solutions. The
standby power is always on, even when the board is powered
off, and the presence of1.8V, 3.3V, and 5V standby power can be
monitored with pins.
4.
SATA 6Gb/s connector & power connector (7-pin SATA6G_1;
5-pin SATA_PWR1)
This connector connects to Serial ATA 6 Gb/s hard disk drives via
the Serial ATA 6 Gb/s signal and power cable.
NOTE: Ensure to use the bundled cable when connecting a hard disk drive to
this connector.
20
VivoMini UN Series
Advertisement
Table of Contents
