Data Format - ID Tech Ez One Shot User Manual

WIRELESS SCANNER SETTINGS

DATA FORMAT

. R011$
*.R011$*
The default Data Format is <Date>, <Time>, <Barcode Data>
below are items and their setup codes:
Code Item
1 Date
2 Time
Example:
To change Data Format to <Barcode Data>, <Date>, <Time>
1. Scan [Data Format]
2. Scan [3], [1], [2] from Group 60.
3. Scan [Data Format]
. R010$
*.R010$*
Default is comma ( , ) . You may replace it with any alphanumeric
characters from the full ASCII table in User's Manual
Example: To change Field Separator to Semicolon ( ; )
1. Scan [Field Separator]
2. Scan [ ; ] from the full ASCII table (Group 52-60)
3. Scan [Field Separator]
DATE & TIME SETUP
SET DATE
Example: To set Date to 2012-08-01 (Year-Month-Day):
1. Scan [Set Date]
2. Scan [1], [2], [0], [8], [0], [1] from Group 60.
3. Scan [Set Date]
SET TIME
Example: To set Time to 08:10:30 am (Hr:Min:Sec)
1. Scan [Set Time]
2. Scan [0], [8], [1], [0], [3], [0] from Group 60.
3. Scan [Set Time]
* To avoid Time and Date being reset to factory default due
to running out of battery, please fully charge the scanner for
at least 3 hours before use.
GROUP-31
. R006$
*.R006$*
. R007$
*.R007$*
For memory version only
DATA FORMAT
Code Item
3 Barcode Data
4 Quantity
FIELD SEPARATOR
For memory version only
.
(on www.ute.com)