Electrical Adjustments; Adjustments With Commander; How To Select Each Mode; Selection Of Drc Mode - Sony KP-ES43HK1 Service Manual

KP-ES43HK1/ME1/MN1/SN1, ES48HK1/ME1/MN1/SN1,
ES53HK1/ME1/MN1/SN1,

6-1. ADJUSTMENTS WITH COMMANDER

Service adjustment to this model can performed with the sup-
plied remote commander RM-961
MUTE
Write data to NVM
ON SCREEN
DISPLAY
Copy PAL data
to NTSC
PIP
TWIN
PROGR
INDEX
Adjustment item
up
Adjustment item
down
User control goes
to the standard state
Read data from
NVM
VOLUME +
ES61HK1/ME1/MN1/SN1K

ELECTRICAL ADJUSTMENTS

(open the cover)
TV STANDBY
. N >
x X z
DRC-MF (blue)
SWAP
Change
the PICTUER MODE
Copy data to all
mode
Data up
Data down
Initialize data
(Not stored)
MENU
JOYSTICK
Up : Category up
Down : Category down
Push : Enter
RM-961
RM-961
SECTION 6

6-1-1. How to Select Each Mode

The adjustment requires the following modes:
DRC1250
DRC100
PIP
TWIN
INDEX
1. Selection of Mode Between 50 Hz and 60 Hz
50 Hz
60 Hz
WIDE 60 Hz : Enter the NTSC signal with video input

2. Selection of DRC Mode

1) Press "DRC-MF (blue)" button on the commander, repeat-
edly until displays the mode that you want to select on the
screen.
Note : The DRC-MF mode is not selectable when using the
"PROGRAM INDEX" or "FAVORITE CH" feature, or
when the "GAME MODE", "PIP", or "TWIN" mode is
turned "ON".
3. Selection of WIDE mode
The WIDE mode is selected only when the DRC1250 of NTSC
signal with video input mode is active.
1) Enter the NTSC signal with video input.
2) Press "DRC-MF (blue)" button on the commander to select
"DRC1250".
3) Press "MENU" button on the commander and move "
up or down to enter the "FEATURE" b "WIDE MODE".
4) Move " " up or down to select "ON" or "OFF", and push
" (ENTER)" button.
5) Press "MENU" button to return to normal screen.
4. Selection of PIP mode
1) Open the remote control cover, press "
the commander.
2) Press " (PIP)" button again to return to normal screen.
5. Selection of TWIN mode
1) Press " (TWIN)" button on the commander.
2) Press " (TWIN)" button again to return to normal screen.
6. Selection of INDEX mode
1) Press "PROGR INDEX" button on the commander.
2) Press "PROGR INDEX" button again to return to normal
screen.
– 44 –
50 Hz 60 Hz WIDE 60 Hz
(PAL) (NTSC) (NTSC)
a a
a a
a a
a a
a a
: Enter the PAL signal.
: Enter the NTSC signal.
(PIP)" button on
a
X
a
X
X
"