Table of Contents
Advertisement
KF-50SX100/50SX100K/50SX100U
RM-903
3-1. ADJUSTMENTS WITH COMMANDER
Service adjustment to this model can performed with the supplied
remote commander RM-903.
MUTE
TV MODE
JOYSTICK
VOLUME +
MENU
1. Selection of Mode Between PAL and NTSC
PAL mode : Enter PAL signal with color burst.
NTSC mode : Enter NTSC signal with color burst. (VIDEO
input only)
2. Selection of Screen Format
1) Press "
(BLUE)" button on the commander.
2) Press v or V key on the joystick to select screen format and
press "
(OK)" button. At this time, normal screen comes
back. (In the TT mode, the menu is switched to the Service
menu.)
3-1-1. How to Enter TT Mode
1. Turn on the main power switch to place this set in standby
mode. (LED will light in red.)
2. Press the buttons on commander as follows, and the TT
mode will be selected.
5
(
ON SCREEN
)
(DIGIT 5)
DISPLAY
"TT - -" will appear in the top right corner of the screen.
Other status information will also be displayed.
RM-903
RM-903
ELECTRICAL ADJUSTMENTS
TV STANDBY
VIDEO
TV
ON SCREEN
DISPLAY
1
2
3
4
5
6
7
8
9
0
OK
PROGR
MENU
RM 903
SONY
TV
RM-903
(VOLUME +)
(TV MODE)
SECTION 3
3. Press "-" + "-" on the commander. If "
button is pressed, the set exits from the TT mode and returns to
normal TV mode.
3-1-2. How to Enter Service Menu
1. Select TT mode.
2. Press "MENU" button on the commander once, and normal
menu screen will appear, or press it once more, and the follow-
ing service menu screen will appear.
Service AE5(A)
Initialising
Reset Devices
Monitoring
Device Register Setting
Special Adjustment
SCREEN
FORMAT
Select : v V
4:3/16:9
3. Following the screen, press v or V key on the joystick to se-
lect the desired item, and press B key to enter the selected
item.
4. Press v or V key on the joystick to change data of each item,
and press "
(Except Projector Engine mode)
5. To return from each item, press b key on the joystick. Or, to
return to the TT mode, press the "MENU" button.
(Except Projector Engine mode)
3-1-3. Screen Display for Service Menu
If each item of service menu is selected, the following screen is
displayed.
• Initialising
Initialising
Model Setting
Destination Setting
Basic Setting
Feature Setting
Select : v V
Enter the
"TT MODE"
– 30 –
Next menu : B
(OK)" button to write changed data.
Next menu : B
(TV MODE)"
Advertisement
Table of Contents
