Electrical Adjustment By Remote Commander; Electrical Adjustments - Sony KF-60DX100 Service Manual

3-1. ELECTRICAL ADJUSTMENT BY REMOTE
COMMANDER
By using remote commander (RM-Y910), all circuit adjust-
ments can be made.
NOTE : Test Equipment Required.
1. Pattern Generator (with component outputs)
2. Oscilloscope
3. Digital multimeter
3-1-1. Method of Setting the Service Adjustment
Mode
1. Standby mode. (Power off)
2. DISPLAY t 5 t VOL (+) t TV POWER
on the remote commander.
(Press each button within a second.)
The following service screen will appear.
Category Name
3D-COMB
NRMD
Item Name
F/A FLAG: xxxxxxxx
CBA FLAG: xxxxxxxx
Category Name
L001OUT
OCKPN
TEMP 42DEG
Item Name
LCD PJ ENGINE
<LCD PROJECTOR ENGINE>
SECTION 3

ELECTRICAL ADJUSTMENTS

Mode
Item No. Data
0 0 SERVICE
TV
WSL: xxx
Input Signal
Item No. Data
0 0 G
VER.0.026
9/11
EE2F
3-1-2. Service Mode Adjustment
1. The SCREEN displays the item being adjusted.
2. Press "1" or "4" on the remote commander to select the
adjustment item.
3. Press "3" or "6" on the remote commander to change the data.
4. Press "2" or "5" on the remote commander to select the category.
Every time you press "2" (Category up), Service mode
changes in the order as shown below.
3D-COMB
2103-1
2103-2
P-BOOST1
P-BOOST2
P-BOOST3
MCP-ADJ1
MCP-ADJ2
MCP-ADJ3
VID ADJ
SNNR
USER STD
MCP-FIX
2151 * L001OUT
5. If you want to recover the latest values press "-" then
"[ENTER]" to read the memory.
6. Press "[MUTING]" then "[ENTER]" to write into memory.
7. Turn power off.
Note: Press "8" then "[ENTER]" on the remote commander to
set the shipping conditions or turn set off and on to exit.
3-1-3. Memory Write Confirmation Method
1. After adjustment, turn power off with the remote commander.
2. Turn power on and set to service mode.
3. Call the adjusted items again and confirm they were adjusted.
– 16 –
AP * L001SCALE
TRUS * L001ENH
DLBY * L001Y
* L001IN
MID1
* L001OPT
MID2
* L001OACT
MID3
MID5 * L001AOI
MID6 * L001POS S
OSD * HV POS AD
* PLL-C
ID1 * D-GM TG
* D-GM IM
CCD
* D-GM WB
* : LCD Projector Engine
KF-60DX100
RM-Y910
* D-GM TEST
* D-GM TPN
* D-GM CUR
* H POS SHI
* SH SET
* LCD-DR
* LM75
* OSD-E
* OPTION-E
OP
ID