Mounting; General Notes On Installation - HomeMatic HmIP-SMO-A Mounting Instruction And Operating Manual

Mounting

5 Mounting
5.1

General notes on installation

The Homematic IP Motion Detector is equipped with a
wall mounting bracket for wall mounting. The lens of
the device can be rotated through 360° and also tilted
in the wall mount. This means that the detection range
can be set to virtually any angle to the wall and the
floor and even adjusted after installation. Find a suitable
mounting location for the motion detector in the are to
be monitored. Follow the instructions in the rest of this
document when mounting the device. We recommend a
mounting height of approx. 2 m for optimum operation.
The detection lens of the motion detector
operates on multiple detection levels, each of
which has 12 segments. This means that, with an
aperture angle of 90°, a range of up to 12 m can
be achieved. The possible detection range is
shown in figure 2.
To
inadvertently by pets, for example, keep them
away from the detection range if at all possible. If
you cannot do this, try to align the detection area
accordingly by adjusting the height of the
detection lens.
34
avoid the detector being triggered