Start-Up - HomeMatic HmIP-SMO-A Mounting Instruction And Operating Manual

wall mounting bracket (A) until it locks. Insert
the device into the designated opening from the
front first and then lock it in place at the back (see
figure 5).
6

Start-up

Please read this entire section before starting to
use the device.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the
operating manual of the Access Point.
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU2. For detailed information, please refer to the
Homematic IP User Guide, available for download
in the download area of www.eQ-3.de.
To integrate the motion detector into your system and
enable it to communicate with other Homematic IP
devices, you must teach-in the device to your Homematic
IP Access Point first.
Start-up
37