6
1.3 Display illumination
When the instrument is first powered up, the display illumination is set
to its lowest (courtesy) level, to facilitate initial access to the keys.
To adjust the level of display illumination:
1. Hold down the disp key for approximately one second, to enter
2. There are four preset illumination levels. Momentarily press the
3. Press any other key to leave the illumination-adjust mode.
Note: The digital display will return to normal operation 7 seconds
after the last key press.
1.4 Remote control
When connected to SeaTalk, the ST60 Wind and Close Hauled Wind
instruments can be controlled remotely with a SeaTalk Remote
Keypad Unit. When any instrument on the SeaTalk bus is selected, the
TRUE/APP indicators on the digital display will flash to indicate that the
keypad has control.
Details on how to use the remote control facility can be found in the
SeaTalk Remote Keypad Owner's Handbook.
ST60 Wind and Close Hauled Wind Instruments Owner's Handbook
the illumination-adjust mode.
disp key to cycle through the these levels until you reach the level
you want.