Raymarine ST60 Owner's Handbook Manual page 15

Chapter 1: Operation
The flow charts show the sequence of key presses and displays for the
various operating tasks. All key presses called for in the flow charts are
momentary, unless otherwise stated.
The type of data displayed (true or apparent) is indicated by a black
square marker is displayed on the digital display adjacent to either the
TRUE or APP legend, as appropriate.
Note: If boat speed information is not available on the SeaTalk bus when
TRUE is selected, the digital display shows a series of dashes and the
analogue pointer will continue to show the apparent wind direction.
Beaufort wind
speed
(not available on
ST60 Close
Hauled Wind)
disp
Maximum
wind
speed
KTS
disp
Maximum
true wind
speed
alarm
Using the disp key
Press
disp
Wind speed
disp
Notes:
1. Screens annotated with * show the
alarm thresholds and are not available
on the ST60 Close Hauled Wind instrument.
To set up the alarm thresholds, refer to
Setting alarm conditions
2. All screens except Wind Speed are
temporary and will time out to the Wind
Speed screen after 7 seconds.
Press
tack
for 3s to reset
maximum wind speed
KTS
disp
momentarily
KTS
disp
(in text).
KTS
LO
Low apparent
wind angle
alarm
LO
disp
High
apparent
wind
angle
HI
alarm
disp
Low true
wind
speed
alarm
D4315-1
3