Dialling Direct Access Memory Buttons; Pre-Programmed Direct Access Memory Buttons - Splicecom PCS 10 Operating Instructions & User Manual

NOTE: The one-touch memory buttons have been pre-programmed to support
the ten most frequently used maximiser System Access Codes. Therefore, press
the desired memory button twice in quick succession to store the memory under
that button for two-touch button access.

Dialling Direct Access memory buttons

Pressing any of the Direct Access memory buttons
automatically display the number stored. If the Handsfree
programmed into the memory then pressing the memory button will automatically
dial the number. If the number is displayed because the Handsfree function has
not been stored, pressing the

Pre-programmed Direct Access memory buttons

The following maximiser system features have been pre-programmed into the 10
one-touch Direct Access memory buttons;
1. Voicemail Access – Press this button for direct access to your voicemail box.
2. Change your Voicemail Greeting – Press this button to listen to your current
greeting and then record a new one.
3. Call Park – Press this button to park the call you' re on, which can then be
retrieved by anyone else on your telephone system. You will be notified
which park slot it has been placed in.
4. Park 1 Collect – Press this button to collect a call parked in park slot 1
5. Park 2 Collect – Press this button to collect a call parked in park slot 2
6. Park 3 Collect – Press this button to collect a call parked in park slot 3
7. Park 4 Collect – Press this button to collect a call parked in park slot 4
button will dial the number.
21
11 once or twice will
has been