Table of Contents
Advertisement
18
SmartCom Room Station
Pocket Guide
LED level on
You can set the keypad button backlight LEDs on
brightness from 0 to 100% in 5% increments
(default set to 100%). Rotate the knob to select
LED level on. and press the knob to select.
Rotate the knob again to select the level you
want and press the knob to set your setting. The
keypad button brightness will change as you
change the settings to show you the selected
brightness.
LED level off
You can set the keypad button backlight LEDs
off brightness from 0 to 100% in 5% increments
(default set to 100%). Rotate the knob to select
LED level off and press the knob to select. Rotate
the knob again to select the level you want and
press the knob to set your selection. The keypad
button brightness will change as you change the
settings to show you the selected brightness.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SmartCom CC-SCRS01 and is the answer not in the manual?
Questions and answers