GE SmartCom CC-SCRS01 Pocket Manual page 2

Copyright Copyright © 2007 GE Security. All rights reserved.
This document may not be copied in whole or in part or other-
wise reproduced without prior written consent from GE Security
except where specifically permitted under US and international
copyright law.
Document number/revision: 1059040A (February 2007).
Disclaimer The information in this document is subject to change without
notice. GE Security ("GE") assumes no responsibility for inaccu-
racies or omissions and specifically disclaims any liabilities,
losses, or risks, personal or otherwise, incurred as a conse-
quence, directly or indirectly, of the use or application of any of
the contents of this document. For the latest documentation,
contact your local supplier or visit us online at www.gesecu-
rity.com.
This publication may contain examples of screen captures and
reports used in daily operations. Examples may include ficti-
tious names of individuals and companies. Any similarity to
names and addresses of actual businesses or persons is entirely
coincidental.
Trademarks GE and the GE monogram are registered trademarks of General
and patents Electric Company.
Other trade names used in this document may be trademarks or
registered trademarks of the manufacturers or vendors of the
respective products.
FCC compliance This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protec-
tion against harmful interference when the equipment is oper-
ated in a residential environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
You are cautioned that any changes or modifications not
expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Software Important: This end-user license agreement ("Agreement") is a
license legal agreement between GE and You. Read the following terms
agreement and conditions carefully before installing or using this software.
This agreement provides a license from GE to use the software.
It also contains warranty information, disclaimers, and liability
limitations. Installing and/or using the software confirms Your
agreement to be bound by these terms and conditions. If You
do not agree with these terms and conditions, do not install or
use the software or, if already installed, immediately cease all
use of the software and promptly uninstall all components of the
software.