Set Calibration - Hologic TLi IQ User Manual

SET CALIBRATION

Option 2 on the Main Menu screen allows the user to set the calibration
on the analyzer. Follow the analyzer prompts. Calibration must be set
when changing cassette lots.
NOTE: If the calibration has not been set, menu option 2 will flash.
Calibration must be set before the analyzer can be used for testing.
The most recent USER ID is always displayed. Press ENTER to accept
the ID, or enter a new User ID. This field will accept 15 alpha or numeric
characters. To leave this field blank, delete the information using the ←
key.
TLi System User Manual
IQ
Section 4 − Software Functions - Detailed Descriptions
fFN MAIN MENU
1-TEST PATIENT
2-SET CALIBRATION
3-DAILY QC
SET CALIBRATION
USER ID
>JOHN SMITH
ENTER-CONFIRM
↓
4 − 3