System Setup - Hologic TLi IQ User Manual

SYSTEM SETUP

1. The Analyzer and Printer should be placed on a flat, level surface.
2. Connect the 9-pin connector of the printer cable to the analyzer and the modular jack to the printer.
System
3. Connect the small connector of the analyzer power adapter to the analyzer and the larger power connector to a
grounded AC electrical outlet. Caution: Only power connectors provided with the TLi
used. Any substitutions can result in damage to the TLi
4. Connect the small connector of the printer power cord to the printer and the larger connector of the power cord to a
grounded AC electrical outlet.
TLi System User Manual
IQ
Section 2 – Installation
Printer
analyzer and printer.
IQ
Analyzer
analyzer and printer may be
IQ
2 – 4