Advertisement
Elevate
Part #
Product
MVJB48zz-xx
ELT 2 Adjusta 48w
MVJB60zz-xx
ELT 2 Adjusta 60w
Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: sales@anthro.com | anthro.com
Certification: Elevate II Adjusta is certified by ETL to UL962 standard for Commercial and Household furnishings.
A S SE MBLY I NSTR UCT I ONS
™
Dual-surface Table
10450 SW Manhasset Dr. | Tualatin, OR 97062
Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409
Rev G, February 2016
II Adjusta
NOTE: The CPU SideRack - Inboard is not included.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Anthro Elevate II Adjusta
Summary of Contents for Anthro Elevate II Adjusta
- Page 1 10450 SW Manhasset Dr. | Tualatin, OR 97062 Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: sales@anthro.com | anthro.com Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409 Rev G, February 2016 Certification: Elevate II Adjusta is certified by ETL to UL962 standard for Commercial and Household furnishings.
-
Page 2: Important Safety Instructions
8. To disconnect, remove plug from outlet. 9. The control box and legs have no user-serviceable parts and must be replaced by components from Anthro. 10. Power cord moves up and down with the table. Make sure power cord moves freely through all positions of the desk. -
Page 3: Parts List
PAR TS L I ST W E LC O ME Before beginning assembly of your Elevate II Adjusta, Thank you for purchasing Anthro's Elevate II Adjusta please review the parts list to verify that your electric lift table! shipment is complete. - Page 4 ƒ Align the Leg Gussets with the holes on the top so the upright flange faces the Front outside of the table and the tapering end points to the front of the table. ƒ Attach each gusset to the top with six 3/4" MDF Screws using the Anthro driver. 3/4" Button Hd PB Screw 325-5575-00 ST EP 2 - INSTA L L L E G S ƒ...
- Page 5 ƒ Use the provided cable clips to route and organize cords. Install one cable clip next to the Leg Gusset for the Keypad Cord (Installed in Step 8). Install the other clip next to the Cross Pan for the Control Box Cables. 1/2” Flat-head Screw Nylock Nuts 325-5193-00 325-5186-00 Elevate II Adjusta Assembly Instructions...
-
Page 6: Detail View
ƒ Secure the brake assembly with six 3/4" Button-head Screws. Mechanism Arm 3/4" Button Hd PB Screw Mechanism Arm 325-5575-00 Questions? Call us at 800.325.3841 or visit anthro.com. We’re happy to walk you through the assembly! - Page 7 ƒ Acclimate table to ambient temperature before use. Load Rating ƒ Elevate II Adjusta has a weight capacity of 150 lbs of distributed load on the back monitor surface and 40 lbs of distributed load on the front keyboard surface.
-
Page 8: Safety Check
ƒ Lift (don't roll) the table over thresholds, transitions, or bumps. TROUB LE S H OOT I N G G U I DE Is the table giving you trouble? Try these steps first. Still need help? Contact Anthro at 800.325.3841. Table won't go up, but it will go down.
Need help?
Do you have a question about the Elevate II Adjusta and is the answer not in the manual?
Questions and answers