Advertisement
Quick Links
A ss e mb ly instructions
eNook
II
®
Part Number: EK3616zz/xx
NOTE: The eNook additional shelves shown above are not included.
Anthro Corporation
| 10450 SW Manhasset Dr. | Tualatin, OR 97062
®
Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: sales@anthro.com | anthro.com
Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409
January 2007
Advertisement
Related Manuals for Anthro eNook II
Summary of Contents for Anthro eNook II
- Page 1 NOTE: The eNook additional shelves shown above are not included. Anthro Corporation | 10450 SW Manhasset Dr. | Tualatin, OR 97062 ® Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: sales@anthro.com | anthro.com Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409 January 2007...
-
Page 2: Parts List
PA r ts list These instructions are for Anthro’s eNook.™ Before beginning Thank you for purchasing eNook ® assembly, please take a moment to review the parts list below This installation is a two person job. - Page 3 steP 1 select the mounting location ¡ When choosing the right place to install your eNook, be sure to check the location of your power source. The power cord that comes with your eNook is 6 ft long. ¡ Your eNook can be mounted to drywall or to wood wall studs. If you’re installing to wood wall studs, go to Step 2. ¡...
- Page 4 To help you visualize where eNook will be on your wall, use the eNook Frame as a template. Questions? Call us at 800.325.3841 or visit anthro.com. We’re happy to walk you through the assembly!
- Page 5 steP 8 install one toGGler™ for Drywall installation ¡ Drill 1/2” diameter hole in your wall at the mounting point. ¡ Insert a TOGGLER into a hole, metal end first. ¡ Pull the plastic ring end so the metal channel rests flush behind the wall.
- Page 6 Frame with the angle slots. Make sure that both fasteners are captured. ¡ Using a 5/32" hex driver, tighten down the workstation screws. Questions? Call us at 800.325.3841 or visit anthro.com. We’re happy to walk you through the assembly!
- Page 7 steP 1 3 insert the bottom tray ¡ Place the Bottom Tray on the eNook shelf so that the logo on the tray faces out. ¡ Align the 2 holes on the back of the Tray with the pins on the Frame. ¡...
- Page 8 ¡ Twist the ends of the clips to keep the cables in place. Congratulations! Your assembly is complete! Questions? Call us at 800.325.3841 or visit anthro.com. We’re happy to walk you through the assembly!
- Page 9 Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409 *300-5394-00* 300-5394-00 warranty: eNook has a five year warranty. notices: Technology Furniture and eNook are trademarks of Anthro Corporation. Patent Pending. Anthro reserves the right to modify the design and specifications without prior notice.
Need help?
Do you have a question about the eNook II and is the answer not in the manual?
Questions and answers