Table of Contents
Advertisement
Quick Links
Elevate,
Product
Part#
36"w Single Surface
ELTA136zz/xx4
48"w Single Surface
ELTA148zz/xx4
60"w Single Surface
ELTA160zz/xx4
72"w Single Surface
ELTA172zz/xx4
Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: sales@anthro.com | anthro.com
AS SE MB LY I NST RU CT I O N S
Electric Lift Table
TM
Anthro Corporation
| 10450 SW Manhasset Dr. | Tualatin, OR 97062
®
Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409
Rev F, January 2013
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Anthro Elevate ELTA136 4 Series
Summary of Contents for Anthro Elevate ELTA136 4 Series
- Page 1 ELTA160zz/xx4 72"w Single Surface ELTA172zz/xx4 Anthro Corporation | 10450 SW Manhasset Dr. | Tualatin, OR 97062 ® Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: sales@anthro.com | anthro.com Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409 Rev F, January 2013...
- Page 2 Product Quantity Part Number W EL C O M E Cableway 36"w Elevate 225-2281-zz Thank you for purchasing Elevate,™ Electric Lift Table! 48"w Elevate 225-2282-zz If you have any questions or if we can help you in any 60"w Elevate 225-2283-zz way, please contact us at 800.325.3841.
- Page 3 PAR TS LI S T (CO N TIN U E D ) 20mm Socket Head Cap Screw 325-5272-00 5mm Hex Key (not shown) 375-5014-00 3/4" Phillips Screw 325-5370-00 5/32" Hex Driver Bit (not shown) 375-5003-00 1-1/4" Button Head Screw 325-5178-00 10’...
- Page 4 225-2050-00 (Black) ¡ Once all cross tubes are installed, tighten all the 225-3522-00 (Silver) basetube screws. Leave the Wood Screws loose until Step 6. Questions? Call us at 800.325.3841 or visit anthro.com. We’re happy to walk you through the assembly!
- Page 5 STEP 5 Install Keypad and Control Box Keypad Detail ¡ Select positions for the Keypad and Control Box, either the left or right side of the Table. Remember that the Keypad and Control Box must be on the same side of the Table. Also, the power cord comes off the back of the Control Box and should be positioned so it can reach the outlet.
- Page 6 STEP 9 Insert End Caps ¡ Pop end caps into cross bar and base tubes. Use the mallet to set them into place. End Cap Questions? Call us at 800.325.3841 or visit anthro.com. We’re happy to walk you through the assembly!
- Page 7 STEP 11 Add Accessories and Install Your Equipment ¡ Now add your Anthro accessories and install your equipment. ¡ A word of caution: the height range of Elevate may be longer than the cords on your equipment. Equipment that is mounted in a SideRack w/Caster or Equipment Shelf, for example, will not move up and down with the table.
- Page 8 Elevate Single-surface Table has a Lifetime Warranty against manufacturing defects, two years for the electrical system. Cords and plugs are not warranted. Notices: Technology Furniture and Elevate are trademarks of Anthro Corporation. Anthro reserves the right to modify the design and specifications without prior notice.
Need help?
Do you have a question about the Elevate ELTA136 4 Series and is the answer not in the manual?
Questions and answers