PEUGEOT 508 Handbook page 80

Ease of use and comfort
Head restraint height and angle
adjustment
F to lower the head restraint, press the lug A
and, going beyond the stiff point, guide the
head restraint downwards, then release the
button at the desired position.
F to raise the head restraint, guide it
upwards to the desired position.
F to remove the head restraint, press the
two lugs B and pull the head restraint
upwards.
F to put the head restraint back in place,
engage the head restraint stems in the
openings keeping them in line with the seat
back. Check that it has engaged by pulling
it upwards.
78
the head restraint is fitted with a
locking mechanism which prevents it
from lowering; this is a safety device in
case of impact.
The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.
Never drive with the head restraints
removed; they must be in place and
adjusted correctly.
Heated seats control
With the engine running, the front seats can be
heated separately.
F use the adjustment wheel to switch on and
select the level of heating required:
0: Off.
1: Low.
2: Medium.
3: High.