PEUGEOT 508 Handbook page 239

Putting the wheel back in place
F Put the wheel back in its housing.
F unscrew the (coloured) central nut by a
few turns then put it in place in the centre
of the wheel.
F tighten fully until the central bolt clicks to
retain the wheel correctly.
F Put the box back in place in the centre of
the wheel and clip it.
F Put the polystyrene storage box back in
place.
In the event of a breakdown
Tyre under-inflation detection
the space-saver type or steel spare
wheel does not have a sensor.
the punctured wheel must be repaired
by a PeugeOt dealer or a qualified
workshop.
8
237