In The Event Of A Breakdown; Warning Triangle - PEUGEOT 508 Handbook

Warning triangle

this safety device should be used in addition to
the hazard warning lamps.
Its presence in the vehicle is mandatory.
the location for stowing a folded
triangle is in the inner trim panel of the
boot lid or tailgate.
Before leaving your vehicle to set up
and install the triangle, switch on the
hazard warning lamps and put on your
high visibility vest.
the dimensions of the triangle (once folded) or
its storage box must be:
- A: length = 438 mm,
- B: height = 56 mm,
- C: width = 38 mm.
Saloon
F Press the lug 1 and pull the assembly
towards you.
SW and non-hybrid RXH
F turn the knob 2 to remove the cover.
F Hold the cover and the triangle so that they
do not fall.

In the event of a breakdown

Placing the triangle in
the road
F Place the triangle behind the vehicle, as
required by the legislation in force in your
country.
Refer to the manufacturer's instructions
on unfolding and installing supplied with
the triangle.
the triangle is available as an
accessory; contact a PeugeOt dealer
or a qualified workshop.
8
227