Isofix Child Seats - PEUGEOT 508 Handbook

Safety
"ISOFIX" mountings
Your vehicle has been approved in accordance
with the latest ISOFIX regulations.
the seats, represented below, are fitted with
regulation ISOFIX mountings.
152
there are three rings for each seat.
- two rings A, located between the vehicle
seat back and cushion, indicated by a
label.
- A ring B, behind the seat, referred to as the
TOP TETHER for fixing the upper strap.
the tOP tetHeR is used to secure the upper
strap of child seats that have one.
this arrangement reduces forward tipping of
the child seat in the event of a front impact.
Saloon
SW and non-hybrid RHX
this ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
the ISOFIX child seats are fitted with
two latches which are easily secured on the
two rings A.
Some also have an upper strap which is
attached to ring B.
to attach this strap, raise the vehicle seat's
head restraint then pass the hook between its
rods. then fix the hook on ring B and tighten
the upper strap.
! the incorrect installation of a child seat
in a vehicle compromises the child's
protection in the event of an accident.
Follow strictly the instructions for
fitting child seats contained in their
manufacturer's installation guide.
For information regarding the ISOFIX child
seats which can be installed in your vehicle,
refer to the table showing the locations for
installing ISOFIX child seats.