PEUGEOT 508 Handbook page 79

Storing driving positions
System which stores the electrical settings of
the driver's seat and door mirrors as well as
the head-up display settings. It enables you to
store up to two positions using the buttons on
the side of the driver's seat.
Storing a position
using buttons M / 1 / 2
F Switch on the ignition.
F Adjust your seat, the door mirrors and the
head-up display.
F Press button M, then press button 1 or 2
within four seconds.
An audible signal indicates that the position
has been stored.
Storing a new position cancels the previous
position.
Recalling a stored position
Ignition on or engine running
F Briefly press button 1 or 2 to recall the
corresponding position.
An audible signal indicates the end of the
adjustment.
You can interrupt the current movement by
pressing button M, 1 or 2 or by using one of the
seat controls.
A stored position cannot be recalled while
driving.
Recalling stored positions is deactivated
45 seconds after switching off the ignition.
Ease of use and comfort
Welcome function
the welcome function assists entry and leaving
the vehicle.
After switching off the ignition and opening
the driver's door, the seat moves back
automatically and then stays in this position,
ready for the next entry to the vehicle.
When switching on the ignition, the seat moves
forward to the stored driving position.
When moving the seat, take care that no
person or object hinders the automatic
movement of the seat.
this function can be activated
or deactivated via the vehicle
configuration menu.
3
77