PEUGEOT 508 Handbook page 236

In the event of a breakdown
Removing the cartridge
F Stow the black pipe.
F Detach the angled base from the white pipe.
F Support the compressor vertically.
F unscrew the cartridge from the bottom.
Beware of discharges of fluid.
the expiry date of the fluid is indicated
on the cartridge.
the sealant cartridge is designed for
single use; even if only partly used, it
must be replaced.
After use, do not discard the cartridge
into the environment, take it to an
authorised waste disposal site or a
PeugeOt dealer.
Do not forget to obtain a new sealant
cartridge, available from PeugeOt
dealers or from a qualified workshop.
234
Checking tyre pressures / inflating accessories
You can also use the compressor, without
injecting any product, to:
- check or adjust the pressure of your tyres,
- inflate other accessories (balls,
bicycle tyres...).
F turn the selector A to the
"Air" position.
F uncoil the black pipe H fully.
F Connect the black pipe to the
valve of the wheel or accessory.
If necessary, fit one of the adaptors
supplied with the kit first.
F Connect the compressor's electrical
connector to the vehicle's 12 V socket.
F Start the vehicle and let the engine run.
F Adjust the pressure using the compressor
(to inflate: switch B in position "I";
to deflate: switch B in position "O" and
press button C), according to the vehicle's
tyre pressure label or the accessory's
pressure label.
F Remove the kit then stow it.