Reversing Camera - PEUGEOT 508 Handbook

Reversing camera

the reversing camera is activated automatically
when reverse gear is engaged.
Depending on version, the image is displayed
in the touch screen or the instrument panel.
the reversing camera function completes the
parking assistance.
the reversing camera cannot in any
circumstances be a substitute for the
vigilance and responsibility of the driver.
It is normal to be able to see part of
the number plate at the bottom of the
screen.
the superimposed representation of guide
lines helps with the manoeuvre.
they are represented by lines marked "on
the ground" and do not allow the position of
the vehicle to be determined relative to tall
obstacles (for example: other vehicles, ...).
the blue lines represent the general direction
of the vehicle (the difference corresponds to
the width of your vehicle without the mirrors).
the red lines represent a distance of about
30 cm beyond the edge of your vehicle's rear
bumper.
the green lines represent distances of
about 1 and 2 metres beyond the edge of your
vehicle's rear bumper.
Opening the boot causes the display to
disappear.
Clean the reversing camera regularly
using a soft, dry cloth.
High pressure jet washing
When washing your vehicle, do not direct the
lance within 30 cm of the camera lens.
Driving
6
199