Instant" Call Forwarding - DETEWE opencom 100 Quick Reference Manual

Delay forwarding of internal
calls" to the number 444.
Call forwarding is executed in the
OpenCom 100, or in the case of ex-
ternal calls, in the network opera-
tor's exchange. The time for "After
Delay" forwarding is preset in the
OpenCom 100 and can be changed
by the system administrator in the
Web console's Configurator.
"MSN call forwarding" is available
for ISDN multi-device ports. Using
this forwarding mode, you can for-
ward incoming external calls to
external destinations for each MSN
(multiple-subscriber number) – pro-
viding you have the necessary au-
thorisation (see also MSN Call For-
warding starting on page 14).
If a queue is active for your tele-
phone, this is not taken into consid-
eration when configuring "Instant"
or "On Busy" call forwarding, and its
content is not transferred to the des-
tination terminal. Calls already in the
queue can only be accepted on the
original terminal – after you have
deactivated call forwarding. If you
have configured "After Delay" call
forwarding, an incoming call enters
a queue if it is active and is for-
warded after the delay. As with all
other forwarded calls, you can ac-
cept the call on the destination ter-
minal.
On ISDN telephones, "Instant", "Af-
ter Delay" and "On Busy" call for-
warding can also be set by means of
a menu for all calls, i.e. internal and
external.
Least Cost Routing (LCR) can be eval-
uated for call forwarding to external
numbers, providing your system ad-
ministrator has configured LCR and
the LCR application in the
OpenCom 100. Ask him about the
applicable setting.

"Instant" Call Forwarding

For internal and external calls
H * 2 1 *
On:
(external access code, e.g.
Z #
(destination no.)
H # 2 1 #
Off:
Only for internal calls
H * 2 1 1 *
On:
(external access code, e.g.
Z #
(destination no.)
H # 2 1 1 #
Off:
Only for external calls
H * 2 1 2 *
On:
(external access code, e.g.
Z #
(destination no.)
H # 2 1 2 #
Off:
Calls (only internal, only external or
all of them) are instantly forwarded
to another telephone and not sig-
nalled at all on the telephone origi-
nally dialled. If you have activated
instant call forwarding, you will hear
a special dialling tone when you lift
the handset.
Forwarding Calls
0
)
0
)
0
)
13