aoyue 937 Plus Instruction Manual page 3

Setting up & Operating the 937
! CAUTION: The sponge is compressed, It will swell when moistened
With water Before using the until, dampen the sponge with
the water and squeezed it dry, Failure to do so may result
in damage to the soldering tip.
Iron Holder
1 .Small cleaning Sponge;
Dampen the small cleaning
sponge with water and then
squeeze it dry.
2.Add water to approximately
the level as shown, the small
sponge will absorb water to
keep the larger sponge above
it wet at all times.
*The large sponge may be used
alone(w/o small sponge & water)
3. Dampen the large cleaning sponge and place it on the iron holder base.
! CAUTION: Be sure to turn off the power switch before connecting or
disconnecting the soldering iron. Failure to do so may damage the P.W.B.
2